PDA

View Full Version : Delco Cleaning Systems of Fort Worth Becomes a Full Line Distributor of Pressure Pro



Larry Hinckley
06-01-2009, 05:50 PM
Delco Cleaning Systems of Fort Worth Becomes a Full Line Distributor of Pressure Pro Pressure Washers
PowerWash.com a wholly owned subsidiary of Delco Cleaning Systems of Fort Worth announces the addition of the Pressure Pro line of pressure washing equipment to their already expansive selection of pressure washing equipment.

PowerWash.com will offer an alternative way of doing business with a pressure washing distributor along with different levels of buying for those who are operating on a tight budget yet you will still enjoy the same friendly, courteous service that you have experienced in your dealings with Delco employees in the past. Our fine crew of technical advisors anchored by Larry Hinckley, a 25 year veteran of the power washing industry, will stand ready to assist you and answer your questions as they always have.

One of the machines in the Pressure Pro line available to you is the PWH-5235SS Hot High Pressure Washer. This is a part of their standard line that has been modified to include
EBP™ – Enhanced Burner Protection™ & AIP™ – Advanced Igniter Protection™.




http://i26.photobucket.com/albums/c147/LarryHinckley/PWH-5235.jpg


PWH-5235SS Hot High Pressure Washer

Featuring:
• EBP™ – Enhanced Burner Protection™
• Burner Power Light
• AIP™ – Advanced Igniter Protection™ safeguards against:
o Electrical Failure, Engine Failure, Low Voltage
o Fuel/Water Separator – Protects against
 Water and Debris in the burner fuel








Features and Benefits:

• 5.2 GPM @ 3,500 PSI, 200°F
• 18 HP Vanguard Electric Start Engine with pull start backup, 12V 20 amp charging system
• 12v Beckett Burner, Thermostat Control, Schedule 80 Coils
• Electrical Protection: 12.8 volts cut-in voltage, 11.8 volts cut-out voltage for burner power.
• Gasoline Engine; Diesel, Kerosene, or Home Heating Oil Fired Burner
• General TS2021B Tri-plex Ceramic Plunger Pump with 4-V Belt Drive
• Block Mounted Pulsar EZ Unloader Valve; Pop-off Safety Valve, Powder Coated Frame
• Water Tank Direct Feed Plumbing – ¾” “Can Type” Water filter with 10’ inlet hose with ¾” MPT.
• By-pass Kit – 10’ Unloader by-pass return to the water tank; Engine & Pump Oil Drains.
• 15 Gallon Poly Diesel Burner & Gasoline Engine Fuel Tanks, 520 CA Battery
• Stainless Steel: Burner Shield, Control Panel, & Belt Guard
• 50’ High Pressure Hose, Trigger Gun, and Wand Assembly with QCs
• Down Stream Low Pressure Chemical Injector with QCs
• Four 5.5 High Pressure Spray Nozzles with QCs: 0°, 15°, 25°, & 40°; and a Low Pressure Chemical Nozzle for after the pump chemical injection through the high pressure hose.
• See video on www.youtube.com , search term “powerwash.com”.
• 5-Year Limited Warranty, L = 48”, W = 38.5”, H = 40”, Shipping Wt. = 895 lbs

Call 817 -529-6630 for pricing and availability.

Powerwash.com
2513 Warfield Street, Fort Worth, Texas 76106
www.powerwash.com

Carlos Gonzales
06-01-2009, 06:08 PM
Larry ...thank you for posting this.

I was just on the site. Quick questions...is there log-in information that we need to have? I only see a couple of machines in the slides but nothing more.

Just curious.

How do we look at the pressure washing training stuff?

Larry Hinckley
06-01-2009, 06:23 PM
Carlos,

We currently only have 4 machines up on the web site. More will be added as time goes on. To view the training videos click on the Video Gallery once you are there click on the one you wish to watch, when the picture opens you then click on the arrow in the center to begin the movie.

Carlos Gonzales
06-01-2009, 06:32 PM
Carlos,

We currently only have 4 machines up on the web site. More will be added as time goes on. To view the training videos click on the Video Gallery once you are there click on the one you wish to watch, when the picture opens you then click on the arrow in the center to begin the movie.

Larry...thank you! Rock and Roll!!

Jeff LeCours
06-01-2009, 11:51 PM
I have 8 Pressure Pro machines from 4 gpm cold to 8 gpm hot. Good solid affordable machines

Congrats Delco

Ron Musgraves
06-02-2009, 12:38 AM
These machine are very affordable for sure, very nice Delco. www.powerwash.com (http://www.powerwash.com) is the address they are at?