• As of January 1, 2018 The brand new logo that was created and released in 2017 will be the only official logo in affect and allowed to be used on any electronic media however, any such media like truck wraps, stationary, and postcards will be grandfathered in. Contributing Members will be allowed to use the UAMCC logo in any advertising. Permission to use the logo otherwise must be in writing. Logos used in electronic formats (ie: Websites, forums, etc.) must be linked back to the member’s profile in the UAMCC directory. Contributing Members are members that are paid and current with their dues. Please contact info@uamcc.org with any questions.

Hot and Mighty Has a New Enclosed Pressure Washing System With Wash Water Recovery

Tomdurbin

Contributing Member
Hello Everyone,

This is to announce our newest member to the Hot and Mighty Line-up. The new model is a variation on our commmander series trailer. This unit is a closed loop recovery and recycyling system with our Hot and Mighty MCS-3506-OH6G skid package and can run two wands or one surface cleaner. It is designed for cleaning concrete in areas without heavy oil build-up. The total package out the door internet or UAMCC member price 23,700.00. I am making a video today and it will be up in about a week in our custom equipment shop blog at www.hotandmighty.com. I will be posting some pictures later today.
 
Last edited:

Tomdurbin

Contributing Member
Re: Hot and Mighty Has a New Enclosed Pressure Washing System With Wash Water Recover

Trailer Specifications:
Manufactured by: Interstate 1
Cargo Trailer
Tandem axle 3500LBS PER AXLE
Dimensions: 7' wide X 14' length
Electric Brakes
Bargman Light Hookup
Curbside door
Roadside door
Exhaust through roof
Spare Tire
Always open vents

Pressure Washer Specifications:

HOT AND MIGHTY MCS-3506-OH6G
Hot or Cold water pressure washer
5.7gpm @ 3500 PSI or two guns each operating at approx 3.0
gpm @ 3500psi
Honda 24HP Gas Motor
Belt drive Tri-plex oil bath general pump
Special pressure regulating unloader for dual gun operation
Bypass line back to holding tank for longer running time in bypass mode
3600psi safety relief
2600 Watt 110v generator for burner system
Adjustable thermostat
High Pressure soap injection
Low pressure soap injection
Steam Valve
Three Way valve (easily switch from tank supply to fresh water inlet)
Hour meter
2 Heavy duty Hose Reels
200’ two wire 6,000psi high pressure hose
Heavy duty deluxe variable pressure wand with swivel
Eight quick connect nozzles
Three Hundred Gallon Water tanks plumbed with a dump valve for quick draining
Rotary nozzle
Spare parts kit

WASH WATER RECOVERY SYSTEM

Mighty- Vac MV23-285 cfm vac package with built in generator for auto pump out
High water shut-off switch to keep water out of your blower (critical)
Dot approved 30 gallon waste tanks with slide out pre-filters and auto pump out
Dot approved 15 gallon Sand catcher drums
Epoxy-phenolic lining for rust resistance
200’ crush resistant extra heavy duty 2” id vacuum hose
39” long sx 11” wide sandbags (just add the sand)
Two Cotton Mouth Wash Water Recovery Dams
21” Flat Surface Cleaner





WASH WATER RECYCLING SYSTEM FOR CONCRETE CLEANING LIGHT OILS

•Three bag Filters with 10” x 23” bags filtration graduated down to 5 microns
•Bag Filter Housing to be Fitted with auto-bleeder valves
Replacement filters (year supply)
 

Tomdurbin

Contributing Member
Re: Hot and Mighty Has a New Enclosed Pressure Washing System With Wash Water Recover

Here are some pictures.
 

Attachments

  • bbs back.jpg
    bbs back.jpg
    46.2 KB · Views: 31
  • bbs filters.jpg
    bbs filters.jpg
    42.6 KB · Views: 28
  • bbs side.jpg
    bbs side.jpg
    42.5 KB · Views: 30
  • bbs vac.jpg
    bbs vac.jpg
    45.9 KB · Views: 30
Top