Gutter brush

[Chris Tharpe]

Thats the brush that I use. I have a hard time keeping it attached to the pole though. It unscews itself sometimes.

I use a seperate solution in a bucket of water. I go around and apply with the brush, let dwell, re-apply if neccessary, then rinse with a water hose.

This is an additional step done after the original housewash/roof clean etc. that is upcharged.

Ive tried Jims method but it doesnt work for me. This method has worked the best so far.

Fold up a piece of cardboard and insert it into the hole on the brush then thread the pole onto it and tighten till you cant anymore and it should fix the problem

[Guy Blackmon]

I bought one of those sunbrite things but keep forgetting to use it!!!

Hope you have better luck using it than I did Mike!!! Bought one a couple of months ago, lets just say I'll stick to the ole Bucket & Brush!!!

[Chad Johnson]

Fold up a piece of cardboard and insert it into the hole on the brush then thread the pole onto it and tighten till you cant anymore and it should fix the problem

Thanks I'll try that.

[John James]

I use a truck brush or a white scrub pad wrapped around a sponge and stick it in a unger fixi clamp.

[Jeff LeCours]

I use a truck brush or a white scrub pad wrapped around a sponge and stick it in a unger fixi clamp.

Ya John, the truck brush works fine for us too

[Greg Rentschler]

Wrap a strip or two of electrical tape around the pole threads before you screw it onto the brush. Ours hold fine that way. Same style brush from Menards.

[Terry Mc Kenna]

Brush, bucket of mix, scrub dwell, scrub rinse.